Enable and view holter normal templates for those with the advanced holter or the advanced holter with pacemaker option.
Enable Normal Template:
Open up an existing holter report.
In IQmark Workstation.
Open the IQmark Workstation software.
Select 'Patient List'.
Double-click the desired patient.
Double-click the desired holter report from the 'Diagnostic Reports' section.
Once the report is open press 'edit'.
In IQmark Centricity Interface.
Open the IQmark Cenricity Interface software.
Select 'Manage Holter' from the top.
Select the desired holter report.
Select 'edit'.
In an EMR.
Open the desired patient's holter report.
If steps are needed one will need to contact their respective EMR support.
Once the report is open select 'edit'.
Press the 'Settings' button.
Select the 'ECG Strips' tab.
Place a check in the box for 'Show Normal Templates'.
Press 'OK'.
Open up an existing holter report.
In IQmark Workstation.
Open the IQmark Workstation software.
Select 'Patient List'.
Double-click the desired patient.
Double-click the desired holter report from the 'Diagnostic Reports' section.
Once the report is open press 'edit'.
In IQmark Centricity Interface.
Open the IQmark Cenricity Interface software.
Select 'Manage Holter' from the top.
Select the desired holter report.
Select 'edit'.
In an EMR.
Open the desired patient's holter report.
If steps are needed one will need to contact their respective EMR support.
Once the report is open select 'edit'.
Press the 'Templates' button.
At the top, select the 'Normal Templates' tab.
Shown on the screen is the list of normal templates.