Steam Sterilizers

Midmark M9® Steam Sterilizer

The Midmark M9 Steam Sterilizer uses a small footprint to drive big productivity. If space is limited in your steri-center, the M9 makes a good fit. This sterilizer is designed to help optimize your instrument processing workflow while maintaining safe and reliable sterilization.

Reliable

Steam-flush pressure pulse air removal system ensures proper steam sterilization.

Easy to Use

Pre-programmed sterilization cycles and intuitive LCD display with prompts ensure quick, confident operation.

Safe

Real-time alerts notify users promptly of any critical system errors.

Award Winning

Year after year, Midmark® Sterilizers have won both the Dental and Ortho Townie Choice Awards®.

  • Technical Specifications

    Overall length w/plug:
    20.38" (51.8 cm)

    Overall width:
    15.3" (38.9 cm)

    Overall height w/printer:
    16.1 in (40.9 cm)

    Minimum countertop area:
    17.88" D x 15.3" W (45.4 cm x 38.9 cm)

    Chamber:
    9" diameter (22.9 cm)
    15" depth (38.1 cm)
    3.5 gal usable volume (13.4 liters)

    Trays:
    Two large –
    7.3" W x 12" L x 0.8" D
    (18.6 cm x 30.5 cm x 2.2 cm)

    Two small –
    5.6" W x 12" L x 0.8" D
    (14.3 cm x 30.5 cm x 2.2 cm)

    Pouch Rack:
    5-slot pouch rack
    1 included with sterilizer
    Additional racks available for purchase

    Unit weight:
    73 lb (33.1 kg)

    Shipping weight:
    81 lb (36.7 kg)

    Water reservoir capacity:
    1.1 gal (4.1 liters)

    Electrical requirements:
    115 VAC, 50/60 Hz, 15 A single phase
    115 VAC has 1,425 W tubular immersion heater
    230 VAC, 50/60 Hz, 10 A single phase
    230 VAC has 1,500 W tubular immersion heater

    Installation: Use on a level, water-resistant material such as laminate, stainless-steel or stone. Allow 2.0" (5.08 cm) on sides and rear, and 5" (12.7 cm) above to allow space to fill reservoir and change the printer paper roll.

    Safety standards:
    UL listed to US and Canada standards
    UL 61010-1, 2nd edition
    IEC 61010-2-040, 1st edition
    CAN/CSA C22.2 No. 61010-1, 2nd edition
    CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st edition

    Meets the requirements of ASME Boiler and Pressure Vessel Code.
    A separate (dedicated) circuit is recommended for this sterilizer.

    Certifications:
    IEC 60601-1-2 Edition 4.0 2014-02
    CISPR II:2009, A1:2010 Class A, Group 1
    IEC 61000-3-2:2014, Part 3-2
    IEC 61000-3-3:2014, Part 3-3
    ANSI/AAMI ST55:2010(R)2014
    ANSI/AAMI/IEC 62304

  • Resources

  • Set-Up and Maintenance

  • Accessories

  • Support

  • Videos

     

     

     

     

     

     

     

     

     

     

VistaCool is a trademark of Vista Research Group, LLC.

Interested in our solutions?

Let’s design better care together—today.

Contact A Sales Rep

 

 

sterilizer-family

Protect Your Investment

When you choose a Midmark sterilizer, protect your investment by purchasing through a Midmark-authorized dental distributor. Purchasing from a non-authorized dealer means the warranty is NOT VALID, and your sterilizer will not be eligible for warranty support through Midmark. Midmark sterilizers are carefully inspected and certified, and our authorized dental distributors are uniquely qualified to install and service them so that you have the best possible experience. Be sure about your purchase. Thank you for choosing Midmark.

See Warranty Details

Note: Medical and Animal Health authorized distributors will vary.