Sani-Kennel Doors

10010756  3' Stainless Steel Gate

10010757 3' Glass Gate

10010758 4' Stainless Steel Gate

10010759 4' Glass Gate

Gate/ Sidelight Options:

All Wire

All Glass

Wire over Glass

Glass over Wire

Glass over FRP

Wire over FRP

Wire over WA

Panel Options:

All Wire

All Glass

Wire over Glass

Glass over Wire

Glass over FRP

Wire over FRP

Wire over WA

Bone Grid over FRP

Bone Grid over WA

Feeder Options:

Double Bowl Bracket 2 1/2 QT or 1 QT

Rotary Double Bowl Insert 1 QT

ITEM NUMBERS

Solid FRP Back Panel

10010754-XXX 3' Back Panel

10010755-XXX 4' Back Panel

("XXX" denotes color choices)

FRP Side Panel with Wire 

10010751-XXX 4' Side Panel

10010752-XXX 5' Side Panel

10010753-XXX 6' Side Panel

("XXX" denotes color choices)

GATES

SIZES

Measured by run width; available in one-inch increments from 29” to 42” wide.

Sidelights: one-inch increments from 43” to 72” wide (measured by run width)

MATERIALS

1” square 18-gauge 304 stainless steel tube construction.

Midmark patented stainless steel two-way latch (other latch options available).

Gate material options:

• Wire grid: 3/16” diameter, 304 stainless-steel; 15/16” spacing between vertical wires; 3-5/8” spacing between horizontal wires; welded intersections.
• Stainless steel sheet: 24-gauge 304 stainless steel sheets bonded on each side of a polypropylene fluted core.
• Glass panel: 1/4” tempered glass with aluminum edge protection.
• FRP (fiberglass reinforced plastic): bonded on each side of a polypropylene fluted core with aluminum edge protection.
• Wilsonart^®: high-pressure laminate bonded on each side of a polypropylene fluted core with aluminum edge protection.

PANELS

SIZES

Side Panels: 6” increments from 36” to 96” wide

Back Panels: 1” increments from 28 ¼” to 95 ¼” wide

MATERIALS

¾” aluminum framework

Panel and sidelight material options:

• Wire grid: 3/16” diameter, 304 stainless-steel; 1½” spacing between vertical wires; 4 ¼” spacing between horizontal wires; welded intersections.
• ½” Thick Bone colored polypropylene grid
• Stainless steel sheet: 24-gauge 304 stainless steel sheets bonded on each side of a polypropylene fluted core.
• Glass panel: 1/4” tempered glass with aluminum edge protection.
• FRP (fiberglass reinforced plastic): bonded on each side of a polypropylene fluted core with aluminum edge protection.
• Wilsonart^®: high-pressure laminate bonded on each side of a polypropylene fluted core with aluminum edge protection.

SANI-SLOPE™ Aluminum Sloped Floor Mounting System (available on aluminum-framed isolation panels): Patented T-flange constructed from solid extruded 6061-T6 aluminum. T-flange dimensions: 2 ½” wide at base; extends to 3” tall. Patented isolation panel bottom rail constructed of solid 6061-T6 extruded aluminum fits over T-flange to level and secure panel. T-flange is sealed to the floor with silicone sealant.

SILVIS SEAL™ (available on aluminum-framed FRP isolation panels): Patented Silvis Seal™ co-extrusion constructed of rigid vinyl base and two flexible polyvinyl chloride (PVC) sealing ribs. Two strips of 3M VHB double-sided tape adhered to the top of the co-extrusion; each seal has end-blocker strip of closed-cell neoprene foam with 3M VHB double-sided tape.