CONTACT A SALES REP

K-9 Cabin Double-Stacked System

K-9 Cabins are stacked to double your capacity without utilizing additional floor space. Configurable options let you create the housing solution that best suits your facility and your animal care needs.

  • Double-stacked design maximizes space efficiency to house multiple animals in a smaller footprint.
  • Durable, pet-friendly materials and secure latching mechanisms enhance patient comfort and safety.
  • Stain- and odor-resistant materials simplify cleaning and support infection control.
  • Units can be free-standing or positioned against a wall.
  • Configured Options

    Upper Panel Options

    • Wire Grid
    • Glass
    • FRP
    • Wilsonart®

    Side, Back and End Panel Options

    • Stainless Steel
    • FRP
    • Wilsonart®

    Gate Options

    • Wire Grid
    • Stainless Steel
    • FRP
    • Wilsonart®

    Wilsonart is a registered trademark of Wilsonart, LLC.

    • FRP Colors
      • Yellow - 334
      • Beige - 878
      • Sage - 255
      • Red - 132
      • Pearl - 671
      • Orange - 131
      • Sky - 245
      • White - 50
      • Blue - 875
      • Taupe - 6107
      • Jade - 484
      • Almond - 698
      • Wilsonart is a registered trademark of Wilsonart, LLC
    • Wilsonart® High Pressure Laminate
      • Amber Cherry - 7919
      • Old Mill Oak - 7973
      • Asian Sand - 7952
      • Sterling Ash - Y0491
      • Milano Quartz - 4726
      • Calcutta Marble - 4925
      • Pebble Piazza - 5009
  • Technical Specifications

    GATES

    Sizes:

    • Measured by run width; available in 1” increments from 24” to 48” wide.
    • Gate widths of 24" to 42" are configured as a full-width gate. Widths of 42" to 48" will be configured as a 42" gate plus a 6" sidelight to equal 48" total width.

    Materials:

    • 1" square 18-gauge 304 stainless steel tube construction.
    • Midmark patented stainless steel two-way latch (other latch options available).
    • Gate and sidelight material options:
      • Wire grid: 3/16” diameter, 304 stainless-steel; 15/16” spacing between vertical wires; 3-5/8” spacing between horizontal wires; welded intersections.
      • Stainless steel sheet: 24-gauge 304 stainless steel sheets bonded on each side of a polypropylene fluted core.
      • Glass panel: 1/4” tempered glass with aluminum edge protection.
      • FRP (fiberglass reinforced plastic): bonded on each side of a polypropylene fluted core with aluminum edge protection.
      • Wilsonart®: high-pressure laminate bonded on each side of a polypropylene fluted core with aluminum edge protection.

    PANELS

    Sizes:

    • Side Panels: 36”, 42” or 48” wide.
    • Back Panels: 1” increments from 24” to 48” wide.
    • Upper Panels: 1" increments from 24" to 48" wide.

    Materials:

    • 3/4" wide aluminum frame.
    • Panel material options (side, back and end panels):
      • Stainless steel sheet: 24-gauge 304 stainless steel sheets bonded on each side of a polypropylene fluted core.
      • FRP (fiberglass reinforced plastic): bonded on each side of a polypropylene fluted core with aluminum edge protection.
      • Wilsonart®: high-pressure laminate bonded on each side of a polypropylene fluted core with aluminum edge protection.
  • Resources

  • Support